Follow

Firmware Update and Cellular Module installation instructions

First follow the attached instructions to update your devices Firmware, then follow the above video for instructions on adding the Module.

 

NOTE: Our manufacturing process has changed slightly.  The existing two pin connector will be unplugged from the BlueTOAD PCB and plugged into the while module.  The module will then be plugged into the BlueTOAD in place of the original cable.  The black cable that is removed from the circuit in this video is still utilized with this new configuration. 

Was this article helpful?
0 out of 0 found this helpful

0 Comments

Please sign in to leave a comment.